PowerWalker WinPower Software V.4.3.0.1 Manual - Manual (Page 103)

103
For remote computer without communication with UPS: If there are more than one UPS supplying
power to the remote computer with software, you want to safely shut down or suspend the remote
computer before all UPS can’t supply power to the remote computer. You should configure the
software installed on the remote computer to be shut down by another computer, refer to the
following picture 4-17-3, and in the “shutdown settings” dialog of another computer with software
communicating with the two UPS to shut down the remote computer, the shutdown condition of each
UPS should be set separately, refer to the following picture 4-17-4 and 4-17-5. The remote computer
won’t be shut down or in suspend mode until all the condition of all UPS is met.
Diagram 4-17-3