PowerWalker WinPower Software V.4.3.0.1 Manual - Manual (Page 64)

64
Note: the function only for UPS. If the “OK” button of the dialog is invalid, it means that
your access to the current Agent is “read only”, and you can’t modify it. You should log in as
a super user.
Add the task of UPS On/Off
Click “Add UPS On/Off” button, and will pop up “Off UPS” dialog. Refer to the following diagram 4-
4-2.
Diagram 4-4-2
In the dialog, users can make a choice in the setting of UPS Power On/Off weekly or in a special
time via the option of “Once” or “Weekly” in the combo box. Set the UPS off and restart time in the
date and time combo box.
Note: the new task of UPS On/Off can’t conflict with the UPS self-test and UPS On/Off tasks that
have been set.
Click the “Cancel” button, the dialog will be closed and the above settings are invalid. Click “Ok”
button, the dialog is closed and the task settings will be shown in the task list. Refer to the following
diagram 4-4-3.