PowerWalker WinPower Software V.4.3.0.1 Manual - Manual (Page 60)

60
Diagram 4-3-2
In the dialog, users can make a choice of setting UPS self-test task as in a special time or monthly
from the options of “once” or “monthly”. You may set the start time of UPS self-test in date and time
combo box.
Note: the new self-test task can’t conflict with the UPS self-test or UPS Power on/off task that has
already been set.
You can select one of the self-test modes from the following.
Self-test for 10 seconds
Self-test until the battery low
Self-test for 1 to 99 minutes
Press the “Cancel” button, the dialog will be closed and the setting above is invalid. Press the “Ok”
button, the dialog will be closed and the task setting will present to the task list. Refer to the following
diagram 4-3-3.