PowerWalker WinPower Software V.4.3.0.1 Manual - Manual (Page 78)

78
Startup Monitor: Refer to the following diagram 4-11-3.
Diagram 4-11-3
Select the Device you want to monitor
You can select the Device from the tree view on the left side of the window.
If the Remote Accept Control Permission Switch of the Agent is not on, you can only monitor but
not control. The submenu “Act as Administrator” of the menu “System” is gray and can’t be selected.
So if you don’t log in as an administrator, you can’t control all of the operation, Refer to the following
diagram 4-11-4.