PowerWalker WinPower Software V.4.3.0.1 Manual User Manual
Page 55
Advertising
55
Diagram 4-1-2
When user selects a device model, "Manager" Window will show detail about the device on the
right.
For Linux and UNIX, PowerWalker-WinPower can't detect the serial port device
automatically. If
the serial port can’t be found in the default setting table, you must add it manually in the
"Communication Port Settings" dialog. Refer to the following Diagram 4-1-3.
Diagram 4-1-3
The default serial port devices setting: refer to the following Table4-1-1.
Platform
Serial Port Device
Linux
/dev/ttyS0 /dev/ttyS1.
Solaris
/dev/ttya /dev/ttyb
HP-UX
/dev/tty0p0 /dev/tty1p0 /dev/tty0p1 /dev/tty0p2
AIX
/dev/tty0 /dev/tty1
UnixWare
/dev/tty1A /dev/tty2A
Advertising