PowerWalker WinPower Software V.4.3.0.1 Manual - Manual (Page 98)

98
Diagram 4-16-5
4. Select the template name and then right-click and select Install/Upgrade VMware Tools
from the menu. (see diagram 4-16-3.)
5. Mount the CD with the command: mount /dev/cdrom /mnt
6. Install the package with the command:
cd /mnt/VMware/RPMS
rpm –Uvh VMware esx*.rpm
NOTE: The package name is likely to be different.
7. Configure the VMware Tools with the command:
vmware-config-tools.pl
8. Enter number: 1
9. Start the VMware Tools with the command:
Vmware-toolbox &
VMware Tools on the summary page displays OK if the tools are available (see diagram 4-16-6).
Diagram 4-16-6
The Software Installation and configuration
NOTE: The "vi-admin" is default user name of vMA without the administrator privilege. If you
can’t install or start software normally, please add “sudo” before every command to act as the
administrator privilege.
To install the software:
1. Start the vMA guest operating system.
2. Download the software from the Web site or from the CD provided with the UPS.
3. Upload the software from Windows to vMA using WinSCP tools.
4. Copy the Linux and InstallerData files from the CD to vMA. Enter the following commands
to access the Linux and InstallerData files:
sudo chmod -R 777 Linux
sudo chmod -R 777 InstallerData
5. Enter the Linux path and then enter the following command to install the software: