PowerWalker WinPower Software V.4.3.0.1 Manual - Manual (Page 56)

56
Tru64 /dev/tty00 /dev/tty01
FreeBSD /dev/ttyd0 /dev/ttyd1
Table4-1-1
Note: For the first time, starting Agent takes more time than later to communicate with the
device. And the software will keep a record of the device. Next time, PowerWalker-WinPower
will start according to the last record. If device COM port, device model or slave address have
been changed, user should click "Auto Search Device" item of "System" menu to get correct
device information.
2. How to realize broadcasting message in LAN
PowerWalker-WinPower has the function of sending the event message to the customer timely via
Windows message service. Refer to the notice in section 13 of Chapter 3 (“Broadcast Message
Settings” Dialog) and Appendix B (PowerWalker-WinPower Event Table) to learn general operation.
Refer to the following diagram 4-2-1.
Diagram 4-2-1
Refer to the range of broadcasting, there are three options: All Users, Domain Users and special
users.