PowerWalker WinPower Software V.4.3.0.1 Manual - Manual (Page 53)

53
Diagram 3-2-30
Note: To carry on this operation, you must have administrator privilege. Select “Act as
Administrator” from the “System” menu to log in as a Super user.
31) "Event Log Setting" Dialog
Note: If the OK button is disabled, the current Agent is read-only, and you cannot set up the
parameters. Select “Act as Administrator” from the “System” menu to log in as a Super user.
1. To view the event records for any UPS monitored by a Network Management Card, select the
UPS under the SNMP node in the tree view and select “SNMP Event Log” from the SNMP menu.
The Event Log for UPS opens.
2. To set the maximum Event Log file length for any UPS monitored by the SNMP Card, select
“Event Log Setting” from the “SNMP” menu. The default file length is 5,000 rows, and the maximum
value is 100,000 rows. Refer to the following diagram 3-2-31.
Diagram 3-2-31