PowerWalker WinPower Software V.4.3.0.1 Manual - Manual (Page 35)

35
Scheduled
Shutdown time.
Table 3-2-9
Note: If the “OK” button is invalid, it means that your access right to the current Agent is
“Read Only”, you can’t setup the parameters. You should log in as a super user.
10) "UPS Self-Test Immediately" Dialog
The “UPS Self-Test Immediately” dialog can be opened from the “Battery Self-Test Now” item of
“Device” menu. Refer to the following diagram 3-2-10.
Diagram 3-2-10
The function is only for UPS.
In the “UPS Self-Test Immediately” dialog, users can select the type of self-test: Self-Test for 10
seconds, Self-Test until battery low, Self-Test for XX minutes. The time range of self-test for XX
minutes is from 1 to 99 minutes.
Note: If the “OK” button is invalid, it means that your access right to the current Agent is
“Read Only”, you can’t carry out the operation. You should log in as a super user.
11) "UPS Test Manager" Dialog
The “UPS Test Manager” dialog can be opened from the “Battery Self-Test Schedule” item of
“Device” menu. Refer to the following diagram 3-2-11.