PowerWalker WinPower Software V.4.3.0.1 Manual - Manual (Page 18)

18
Chapter 3 PowerWalker-WinPower User Interface
1. "PowerWalker-WinPower Manager" window
PowerWalker-WinPower Monitor shows "PowerWalker-WinPower Manager" window, which
displays a list of agents within the LAN.
There is a tree view on the left side of the window, which displays a hierarchical list of items. Such
as “Root”, “networks”, the Agent, the COM port, USB port and the UPS or ATS models or telecom
power. By clicking an item for UPS, the user can expand or collapse the associated list of submenu.
Refer to the following diagram 3-1-1.
Diagram 3-1-1
If you select one of the UPS model from the List, details about it will be displayed on the right side,
Refer to the following diagram 3-1-2.
1. The middle area displays the UPS Status Figure. The Status Figure is different according to
various UPS status and UPS type.
2. The upper area displays the UPS Status Description and recommendation, and the Agent
system times with right align.
3. The lower area displays last two events information.
4. It is able to minimize the window by clicking the minimum button on the top right corner of the
window.
5. It is able to exit from the system by clicking “X”.