PowerWalker WinPower Software V.4.3.0.1 Manual - Manual (Page 99)

99
cd Linux
sudo ./setup_console.bin
6.
After install software OK, enter software installation file path and execute script “config.pl”:
Enter the command: sudo ./config.pl
Input the target host ip(or hostname), username, password. Software support multi-hosts
shutdown.
For example: 172.18.127.125 and 172.18.127.110 will be added, refer to the following diagram:
The host information will be saved in hostlist document, refer to the following diagram.
Note: The password will be encrypted.
7. Start the Agent. From the installation path, enter the command:
sudo ./agent start
8. Configure the shutdown parameter of the software agent installed on vMA to shut down the guest
OS and VMware ESXi server safely.
● the software agent installed on vMA should select the check box of Remote Shutdown by Agent
and add the IP of another software agent, and select the check box of Run Command File before
Shutdown in shutdown settings dialog. Please refer to diagram 4-16-7. For example: another
software agent IP is 172.18.127.10.