PowerWalker WinPower Software V.4.3.0.1 Manual - Manual (Page 73)

73
Diagram 4-8-2
Modifying the system administrator password
Click the “Modify Administrator Password” menu of the “System” menu to popup the “Administrator
Password Settings” dialog. The menu is valid within the local Agent only. Refer to the following
diagram 4-8-3.
Diagram 4-8-3
Enter the new password in the “New Password” edit box, reenter it in the “confirm password” edit
box. Click the “OK” button to finish the setting.
Note: If the “OK” button is invalid, it means that the access right to the current Agent is
“read only”, and you can’t operate. You should log in as a super user.
9. How to realize sending event message by email
Precondition
When event occurs, the precondition of realizing sending message by email is connecting the
computer with PowerWalker-WinPower to the Internet.
Steps
Set “Email Service”: click the “Email setting” item of the “Tools” menu, and will pop up the “Email
Settings” dialog. Refer to the following diagram 4-9-1.