PowerWalker WinPower Software V.4.3.0.1 Manual - Manual (Page 27)

27
Diagram 3-2-6-7
Note: Click “Default” button and the parameters in this page will become default. If the
“OK” button is invalid, it means your access right to the current Agent is “Read Only”, and
you cannot setup the parameters. You should log in as a super user.
7) "Device Control Parameters" Dialog
The "Device Control Parameters" Dialog will pop up when user selects "Device Control
Parameters" item of “Device” menu.
For ON-LINE Device , refer to the following diagram 3-2-7-1.