PowerWalker WinPower Software V.4.3.0.1 Manual - Manual (Page 37)

37
Diagram 3-2-12
The function is only for UPS.
The “UPS On/Off Manager” dialog is used to display and set up UPS On/Off tasks. The UPS
On/Off tasks include two types: “Once” and “Weekly”. The UPS Power Off time range (from
shutdown to turning on next time) that can be set is 1-9999 minutes, i.e. the longest power off time is
6 days 22 hours and 39 minutes. The input range for the year is 2002-2035. The “UPS On/Off
Manager” dialog contains task list and calendar. All the UPS self-test and UPS On/Off tasks are
shown in the calendar. We use red dot to denote the Power Off action, green dot to denote the
Power On action and blue dot to denote self-test action in the calendar. Users can setup weekly and
special time’s UPS Power On/Off tasks in the popped up dialog by clicking “Add UPS shutdown”
button. Note: In terms of time, the new added task can’t conflict with the UPS self-test task and UPS
Power On/Off tasks that have been set. If you select one of the UPS self-test tasks in the list, you
can modify the setup task by clicking the “Modify” button. You also can remove the task by clicking
“Remove” button.
Note: If the “OK”, “Add Test”, “Modify” and “Remove” buttons are invalid, it means that
your access right to the current Agent is “read only” and you can’t carry out the setting. You
should log in as a super user.
13) "Schedule Viewer" Dialog
The “Schedule Viewer” dialog can be opened from the “View Schedule” item of the “UPS” menu.
Refer to the following diagram 3-2-13.