GE Industrial Solutions AF-600 FP Lonworks - Manual (Page 13)

4.1.8 LED Behaviour
MS: Service LED (red)
Situation LED Description
Configured state (Nornal operation) ½ sec. ON, then continously OFF The node is configures and running normally
Non configures state Flashing ½ Hz Node is not configures but has an application.
Proceed with loading node.
Applicationlessstate 1 sec. ON, 2 sec. OFF, then continuosly ON Node has no application, the LonWorks option
needs replacing or reprogramming
Watchdog resets Short flash about each 3 sec. Indicates problem with application. The Lon-
Works option needs replacing
Faulty hardware Steady ON or OFF The LonWorks option needs replacing
NS: Status LED (green)
Situation LED Description
Node configured Steady ON The node is configured and running
normally
Wink service Flashing ½ Hz for 20 sec. Wink service activated in order to
identify node.
AF-600 FP LonWorks
12
4