GE Industrial Solutions AF-600 FP Lonworks - Manual (Page 48)

8 Parameters
8.1 Parameter List
8.1.1 Parameter List
Par. No. Parameter name: Default value: Range:
Conversion
type:
Data type:
O-01 Control Site Dig. and control word [0] [0 - 2] - 5
O-02 Control Word Source Drive Port [1] [0 - 4] - 5
O-03 Control Word Timeout Time 600 s 0.1 - 18000 1 7
O-04 Control Word Timeout Function Off [0] [0 - 10] - 5
O-05 End-of-timeout Function Hold set-up [0] [0 - 1] - 5
O-06 Reset Control Word Timeout Do not reset [0] [0 - 1] - 5
O-07 Diagnosis Trigger Disable [0] [0 - 3] - 5
O-10 Control Word Profile Drive profile [0] [0 - x] - 5
O-50 Coasting Select Logic OR [3] [0 - 3] - 5
O-52 DC Brake Select Logic OR [3] [0 - 3] - 5
O-53 Start Select Logic OR [3] [0 - 3] - 5
O-54 Reversing Select Logic OR [3] [0 - 3] - 5
O-55 Set-up Select Logic OR [3] [0 - 3] - 5
O-56 Preset Reference Select Logic OR [3] [0 - 3] - 5
LN-00 Neuron ID 00 00 00 00 00 00 - - 10
LN-10 Drive Profile VSD 6010 [0] - - 5
LN-15 Lon Warning Word 0 - - 6
LN-18 LonWorks Revision [0, 10] - - 9
LN-21 Store Data Values Off [0] [0 - 1] - 5
8.2 Parameter Group O-##
O-01 Control Site
Option: Function:
The setting in this parameter overrides the settings in par.O-50 Coasting Select to par.O-56 Preset Refer-
ence Select.
[0] * Digital and ctrl.word Control by using both digital input and control word.
[1] Digital only Control by using digital inputs only.
[2] Controlword only Control by using control word only.
O-02 Control Word Source
Option: Function:
Select the source of the control word: one of two serial interfaces or four installed options. During initial
power-up, the drive automatically sets this parameter to Option A [3] if it detects a valid network option
installed in slot A. If the option is removed, the drive detects a change in the configuration, sets
par.O-02 Control Word Source back to default setting Drive Port, and the drive then trips. If an option is
installed after initial power-up, the setting of par.O-02 Control Word Source will not change but the drive
will trip and display: Alarm 67 Option Changed.
[0] None
[1] Drive Port
[2] USB Port
[3] * Option A
AF-600 FP LonWorks
47
8