GE Industrial Solutions AF-600 FP Lonworks - Manual (Page 19)

5.2 Network Variable Description
5.2.1 - Drive VSD Profile - Input
Start/Stop
Variable
name: SNVT
type:
State: Value: Command:
nviStartStop SNVT_switch 0 (False) Any Stop (0x043C)
1 (True) 0 Running 0% (0x047C)
1 (True) 1-200 Running 0.5 to 100.0%
1 (True) 201-255 Running100%
0xFF (default) Any AUTO (invalid, no action)
This variable sends a Start or Stop command to the frequency converter and a reference (0 - 100 %)
NB!
The reference value of nviStartStop will only be valid if both nviRefPcnt and nviRefHz are = 0
Control Word
Variable
name: SNVT
type:
State:
nviControlword SNVT_state Boolean 1 bit x 16
The input network variable nviControlWord is a 16-bit word providing additional operational control of the frequency converter.
For more information about the Control word, please refer to the GE Drive Control Profile section.
NB!
Please note in the representation of the Control Word in the LonMaker Browser, the LSB is to the far left.
Reset fault
Variable
name: SNVT
type:
State: Value: Command:
nviResetFault SNVT_switch 0 (False) Any No reset
1 (True) Any Reset (0x04B)
0xFF (default) Any AUTO (invalid, no action)
This variable sends a reset command to the frequency converter via bit 7 in the Control Word (0x04BC), see the GE Drive Control Profile section.
AF-600 FP LonWorks
18
5