GE Industrial Solutions AF-600 FP Lonworks - Manual (Page 22)

Analog Output (X30 / 8)
Variable
name: SNVT
type:
Value:
nvi101AnOut1 SNVT_lev_percent Min.: Max.: Resulution:
0 % 100 % 0.01 %
NB!
This output variable applies only if the General Purpose I/O option (OPCSGPIO) is installed in the frequency converter.
This variable controls the X30/8 analog output on the OPCGPIO field installed option module as 0-20 mA or 4-20 mA.
In order to control output X30/8 via LonWorks, par. AN-60 Terminal X30/8 Output must be set to one of the following options:
[139] Bus ctrl. 0-20 mA
[140] Bus crtl. 4-20 mA
[141] Bus crtl. 0-20 mA Timeout
[142] Bus crtl. 4-20 mA Timeout
Function:
Bus crtl. 0-20 mA [139]: The output is controlled via bus. In the event of bus timeout, the output level remains unchanged.
Bus crtl. 4-20 mA [140]: The output is controlled via bus. In the event of bus timeout, the output level remains unchanged.
Bus crtl. 0-20 mA [141]: The output is controlled via bus. In the event of bus timeout, the output level is set to the predefined level in par. AN-64 Terminal X30/8
Output Timeout Preset.
Bus crtl. 4-20 mA [142]: The output is controlled via bus. In the event of bus timeout, the output level is set to the predefined level in par. AN-64 Terminal X30/8
Output Timeout Preset.
Analog Output (X42 / 7) (OPCGPIO only)
Variable
name: SNVT
type:
Value:
nvi109AnOut1 SNVT_lev_percent Min.: Max.: Resulution:
0 % 100 % 0.01 %
Analog Output (X42 / 9) (OPCGPIO only)
Variable
name: SNVT
type:
Value:
nvi109AnOut2 SNVT_lev_percent Min.: Max.: Resulution:
0 % 100 % 0.01 %
Analog Output (X42 /11) (OPCGPIO only)
Variable name: SNVT type: Value:
nvi109AnOut3 SNVT_lev_percent Min.: Max.: Resulution:
0 % 100 % 0.01 %
AF-600 FP LonWorks
21
5