GE Industrial Solutions MX350 Instruction manual - Manual (Page 18)

2–2 MX350 AUTOMATIC TRANSFER CONTROL SYSTEM – INSTRUCTION MANUAL
MECHANICAL INSTALLATION CHAPTER 2: INSTALLATION
Figure 1: MX350 dimensions
Product identification
The product identification label is located on the side panel of the MX350. This label
indicates the product model, serial number, firmware revision, and date of manufacture.
Figure 2: MX350 label
Mounting
The MX350 can be mounted three ways: standard panel mount, DIN rail mount, and screw
mount for high vibration environments.
The standard panel mount and cutout dimensions are illustrated below.
2.425”
(61.6 mm)
0.525”
(13.3 mm)
889748A1.CDR
Model:
Serial Number:
Firmware: Mfg. Date: