GE Industrial Solutions MX350 Instruction manual - Manual (Page 31)

MX350 AUTOMATIC TRANSFER CONTROL SYSTEM – INSTRUCTION MANUAL 3–1
MX350 Automatic Transfer Control
System
Chapter 3: Interfacing with the
MX350 AT Controller
Digital Energy
Multilin
Interfacing with the MX350 AT Controller There are four methods of interfacing with the MX350 ATS Controller.
•
Interfacing via the graphical control panel.
• Interfacing via remote inputs.
• Interfacing via communicated inputs.
• Interfacing via the EnerVista™ MX350 Setup software.
This section provides an overview of the interfacing methods available with the MX350. For
additional details on interface parameters (for example, settings, actual values, etc.), refer
to the individual chapters.
Graphical control panel
The MX350 graphical control panel provides the operator with rapid access to relevant
information and controls using intuitive sequences. It also provides all available
information and setting control, again with intuitive sequences.
Introduction to the graphical control panel
The central feature of the graphical control panel is a 89 mm (3.5-inch) 320 by 240 pixel
backlit color LCD screen. The panel also contains keys (pushbuttons) that control the
display and perform commands. In addition, the interface contains ALARM RESET, TEST,
CONTROL, and INFO direct acting control pushbuttons.
The display also contains several LED indicators that provide a summary of the machine
status. Details are displayed on the screen when the user navigates to the appropriate
page.