GE Industrial Solutions MX350 Instruction manual User Manual
Page 61
CHAPTER 3: INTERFACING WITH THE MX350 AT CONTROLLER
POWER ANALYSIS
MX350 AUTOMATIC TRANSFER CONTROL SYSTEM – INSTRUCTION MANUAL
3–31
4.
To view a previously-saved COMTRADE file, click the Open button and select the
corresponding COMTRADE file.
5.
To view the captured waveforms, click on the Launch Viewer button. A detailed
Waveform Capture window will appear as shown below.
6.
The red vertical line indicates the trigger point.
7.
The date and time of the trigger is displayed at the top left corner of the window. To
match the captured waveform with the event that triggered it, make note of the time
and date shown in the graph. Then find the event that matches the same time and
date in the event recorder. The event record will provide additional information on the
cause and the system conditions at the time and date of the event.