Metering, Current metering, Voltage metering – GE Industrial Solutions MX350 Instruction manual User Manual
Page 70: Metering - 2, Current metering - 2 voltage metering - 2
Advertising
4–2
MX350 AUTOMATIC TRANSFER CONTROL SYSTEM – INSTRUCTION MANUAL
METERING
CHAPTER 4: ACTUAL VALUES
Metering
Current metering
Select the Values > Amps page to display the metered current for all three phases and
ground/neutral.
Figure 2: Current metering page
Voltage metering
Select the Values > Volts page to display the metered voltage for all three phases of both
sources, as well as their respective frequencies.
Figure 3: Voltage metering page
NOTE
NOTE:
Voltage metering displayed on this page is L-L for a 3-phase system. L-N values are shown
on the Phasor page. See the Phasor section in the Diagnostics chapter of this manual.
Advertising