GE Industrial Solutions GPS2436 - Manual (Page 17)

Galaxy Power System GPS2436
Issue 1 August 2012 17
4 Rectifiers
NE100AC24ATEZ
Overview
The NE100AC24ATEZ Series rectifier (100A) operates from single-phase ac
service with a phase-to-phase voltage within the range of 95-275Vac.
The rectifiers are shipped separately from the cabinets for quick and
straightforward installation into rectifier shelves at the site. Interconnections
to ac input, dc output, and control signals occur automatically during
insertion. No settings or adjustments to potentiometers are necessary.
The NE100AC24ATEZ rectifiers are UL Recognized for both the U. S. and
Canada, comply with UL1950 (Information Technology Equipment), and meet
EN60950 requirements.
Front Panel Display
Status Indicators
Three LEDs on the rectifier’s faceplate indicate the rectifier’s condition.
•
The Norm LED is green and is lit when the rectifier has AC input present and is
working properly.
•
The ACF LED is amber and is lit when there is no AC input present to the
rectifier.
•
The Fail LED is red and is lit if there is a failure in the rectifier.
Lamp Test
To test the LEDs on the rectifier front panel, press the Lamp Test button on
the controller.