Safety, Installation materials – GE Industrial Solutions GPS2436 User Manual
Page 38
Galaxy Power System GPS2436
Issue 1 August 2012
38
Safety
Action
Verified
Always consider personal safety before beginning any procedure.
Review the Safety section.
Be aware of the presence of unfused battery potential in the vicinity of
the controller.
Use only insulated tools.
Make sure the system is properly grounded per the National Electrical
Code and local building codes.
Remove all metal jewelry before beginning the installation.
Installation Materials
Item
Verified
Wire cutters and strippers
18 to 22 AWG wire
Jewelers screwdriver (Flat and Phillips)
Small needle nose pliers
Digital meter, +/- 0.02%
Screw Drivers (flat-blade and Phillips)
ESD wrist strap
Wire-wrap tool or Amp alarm punch-down tool
Figure 9-1: Millennium II