GE Industrial Solutions Millennium II Controller J85501P-1 - Manual (Page 6)

Basic Installation and User’s Guide for the Millennium II Controller
Issue 3 January 2008 6
2 Product Description
Overview
The Millennium II has been designed to be a complete power system monitor and
controller with a variety of alarming and remote access capabilities that complies with all
relevant regulatory requirements, respectively. It is the nerve center of the battery plant
that utilizes serial monitored and controlled rectifiers, converters, and system peripherals.
It monitors and controls the plant rectifiers, distribution, and batteries. It can also monitor
and control peripheral power equipment, including standby generators, converter plants,
and inverters.
The Millennium II monitors and control battery plants containing up to 64 Galaxy serial
rectifiers, up to 16 serial converters, and up to 32 Bay Interface Cards (BICs). A
maximum combination of 85 GP nodes can be directly managed on the rectifier RS485
serial bus. The following table contains the
Lineage Power rectifiers that can interface with
the Galaxy Millennium II:
Table 2-A: Rectifiers That May Be Used With Millennium II
Model Vdc Current
570A -48V 100A
595A, 595B,
595C, 595LTA,
595LTB -48V 200A/220A
596A / 596D -48V 50A / 100A
596B +24V 100A / 125A
596F +24V 100A
NP +24V / -
48V 24A – 50A
CPS6000 QS86X -48V 7.5A – 50A
AC3000 -48V 60A
Feature Summary
The Millennium II has combined and enhanced its Millennium predecessor’s Basic,
Intelligent, and Network functionality into its standard offering. This controller unit
supports
Lineage Power ‘s most extensive controller feature set. Following is a summary of
the features available in the Millennium II.