Alpha Technologies Cordex Controller Ver.3.1x - Manual (Page 45)

43 0700015-J0 Rev B
6.4 Inverters
The inverter menus are only available from the controller web interface.
Figure 39 — View live status web interface
Select a row to send a locate com-
mand. The inverter module LEDs
will blink momentarily
The user can re-assign the
inverter module number in
the report, for example, to
correspond with its physical
location on the shelf.
Selecting a module number
that is already used will swap
the two modules.
6.4.1 View live status
• Lists all the currently active inverter specific and system alarms. Table R provides a description of
alarms and possible solutions.
• Lists of all acquired inverters in the system.
• Can be used to locate a physical rectifier in a shelf