Alpha Technologies Cordex Controller Ver.3.1x - Manual (Page 82)

0700015-J0 Rev B 80
ADIO Configure Signals – enables the Supervisor to input a value for a range to apply to all selected
channels. In this case, the BCMC if so equipped:
Figure 87 — BCMC configuration example one (set DCCT range in Amps)
ADIO Static Calibration (Web Interface Only) – enables the Supervisor to calibrate ADIO (except BCMC)
analog inputs without the need for a live signal at the input. This is similar to Static Calibration for control-
ler analog inputs described previously.
Figure 88 — BCMC configuration example two (set String Current range in Amps)