Alpha Technologies Cordex Controller Ver.3.1x User Manual
Page 75
73
0700015-J0 Rev B
6.7.2.2 Analog Inputs
Refer to section 6.7.1 for an overview of analog input channels.
6.7.2.3 Digital Inputs
Select this heading from the pull-down menu to access a list of all the existing digital channels, see
6.6.4.2 for Alarms. The status of the channel, high or low, is displayed in the column next to the channel
name. (Web: Main Menu > Signals > View Live Status)
6.7.2.4 Rectifier Signals
Select this heading from the pull-down menu to access a list of all the existing rectifier signals. The status
of the signal is displayed in the column next to the signal name.
AC Mains Voltage Correction
– provides the means to apply a correction factor to the reading coming
from the rectifier. Each AC input phase and the combined average AC voltage have correction factors.
6.7.2.5 Custom Signals
NEW FEATURE
This software version includes an additional 10 custom signals for a total of 20. See "2.13
Signals Management" on page 75.
For the web interface, select the unit text string from the drop down menu that represents the units value,
e.g., ±V, AH, mm, etc.
Select Set by SNMP or Set By Equation.
Figure 75 — AC mains voltage correction via web interface
Figure 76 — Signals – Custom Signals