CONTREX MLP-Drive - Manual (Page 105)

3 - 67
Output Monitoring
These MPs monitor the MLP–Drive's outputs.
MP-47 SPEED COMMAND OUT
The Drive Output (MP-47) Displays the drive output level to the motor. Drive Output is
displayed as a percentage; 100 represents 100% of the drive output.
MP-56 LOGIC OUTPUTS
The Logic Outputs (MP-56) displays the status of the Dig_Out1 and the Dig_Out2
outputs. The number “1” indicates an inactive or de-energized (logic high) level. The
number “0” indicates an active or energized (logic low) level. In the example below,
“Dig_Out2” is the inactive or de-energized (logic high) level.
Dig_Out1 (J5 Pin 15)
Dig_Out2 (J5 Pin 16)
Not Used
Not Used
Code