CONTREX MLP-Drive User Manual
Page 44
3 - 6
CAUTION:
Make certain that you record your password in the space provided on page 3-6, as your
password becomes transparent once you have entered it. If you forget your password,
you can use the Clear/7 procedure to revert back to the default “ULOC” (unlocked).
Please note, however, that the Clear/7 procedure will revert all of the Control
Parameters back to their original default values and you will lose any changes that you
have made to the Control Parameters. Therefore, make certain that you have recorded
all Control Parameter changes in the space provided in Appendix D before you use the
Clear/7 procedure. Refer to
Troubleshooting: Troubleshooting
, for instructions on the
Clear/7 procedure. If you are uncertain how to enter a Control Parameter, review the
Operations: Keypad
section.
Record your numeric Keypad Lockout password here: