CONTREX MLP-Drive - Manual (Page 154)

Glossary - 6
Input Monitoring Lead Frequency (MP-41)
Feedback Frequency (MP-43)
Logic Inputs, Group A (MP-54)
Logic Inputs, Group B (MP-55)
Input Test Tests the Logic Inputs.
Inputs AC Power
I/O Power
Lead Frequency
Feedback Frequency
Run
Jog
R–Stop
F-Stop
Master or Follower
Setpoint Select
Scroll Up
Scroll Down
Integral See Appendix C;CP-66.
Jog One of four operating states. Jog increases the RPMs at
the acceleration rate that is specified in Acceleration Time
(CP-16) until the Jog Setpoint (CP-05) is achieved. When
Jog is terminated, there is no Deceleration Time; the drive
motor comes to an immediate stop.
Keypad Test Tests the Keypad.
LED Display The two digit Parameter Code is displayed on the left LED
Display. The Parameter Code's value is displayed on the
right LED display. This value can be up to four digits.
Logic Inputs F–Stop
R–Stop
Run
Jog
Setpoint Select