Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual User Manual
Page 162
Teledyne LeCroy
Emulation
160
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Figure 2.152: SATA: Host Setting Tab
Choose Host Emulator Port
For each port, select a speed.
Pattern Generator
You can select a Pattern Generation file. To perform a capture with a Pattern Generator,
enter a path to a pattern generator *.spg file in the File Name dialog. See
“Creating a
Pattern Generator File” on page 477
for instructions how to create a Pattern Generator
file.
Host Emulator
You can run an Host Emulator while setting:
Auto stop Exerciser when Analyzer stops
Auto stop Analyzer when Exerciser stopped
CONT usage
Auto update “Sector Count” before running
Delay between getting HOLD to Sending HOLDA
Data Frame Payload Size
ATA Command Execution Timeout
Logical Block Size (for ATAPI)
Check Autostop exerciser when Analyzer Stopped to halt the Host Emulator when the
Analyzer stops.