Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual User Manual
Page 171
Advertising
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
169
Emulation
Teledyne LeCroy
Figure 2.164: Set Counter as Data
Random Data Pattern
To use a random data pattern, click the Random button, enter the number of times to
repeat the pattern, and click OK.
Figure 2.165: Choose a Random Pattern
Walking Bit Pattern
To use a walking bit pattern, click the Walking Bit button, then choose either a walking bit
of “0” or “1”, the walk direction, the start position, and the number of times to repeat the
pattern (see
Figure 2.166 on page 170
).
Advertising