Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual User Manual
Page 382
Advertising
Teledyne LeCroy
Creating a Sequence
380
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Figure 4.41: Example 7: Adding a Second Sequence
4. Create two states in the second sequence with the characteristics shown in the
following table.
TABLE 4.10: Example 7: States for Second Sequence
State
Event
Action
0
Address Frame from Target
Branch to State 1
1
Address Frame from Initiator
Beep for 2 seconds.
Advertising