Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual - Manual (Page 316)

Teledyne LeCroy Floating License
314 Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Sampling Memory Size and Segment Number parameters, the resulting sample size may not be
the same. However, if traffic load distribution is similar, sample size will be similar.
Note:
The buffer status indicator shows buffer by FPGA, not by port.
If the Sampling Memory Usage Optimization Option is Not Checked
Each physical link (or logical link if MUX is enabled) is assigned to a specific memory space
(memory bank), depending on the Sampling Memory Size and Segment Number
parameters.
Important: If any physical link fills its memory bank, the recording process stops. Other
memory banks will typically be less than full (and can be empty). The sample file might be
smaller than the user‐defined Sampling Memory Size. You might even think that the
Analyzer malfunctioned.
3.19 Floating License
Note: License Manager is only available when in Cascading mode. For example, if one unit is licensed
only for JJ and a second unit is licensed only for AA, cascading the two units and using the
License Manager allows each unit to do JA.
To manage the license, select Setup > Manage Setup Licenses.
The Floating License dialog displays (see Figure 3.108 on page 289 ) the available
functionality by Function, Total Ports, Assigned To ports, and Not Used. It also displays
the Current License Configuration by License Type, Serial Number, Analyzer,
Device Emulator, Host Emulator, and InFusion.