Dialog (see, Figure 2.174 on – Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual User Manual
Page 182
Advertising
Teledyne LeCroy
Target and Device Emulation
180
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Figure 2.174: SAS: Setting General Errors
SATA: In addition to specifying general errors, you can also set errors for ATA Commands
and SATA Signature by clicking the corresponding icon in the Errors window.
Figure 2.175: SATA: Setting General Errors
Advertising