Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual - Manual (Page 457)

Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual 455
Sierra Trainer Generation Commands Teledyne LeCroy
AUTO_WAIT_SAS_AFTER Settings
AUTO_WAIT_SAS_AFTER_
CLOSE_FOR_CLOSE
FALSE When set, the generator will insert WAIT_FOR CLOSE
command immediately after each CLOSE primitive.
AUTO_WAIT_SAS_AFTER_
EOF_FOR_ACK FALSE When set, the generator will insert WAIT_FOR ACK
command immediately after each EOF primitive.
AUTO_WAIT_SAS_AFTER_
EOF_FOR_ACK_OR_NAK FALSE When set, the generator will insert WAIT_FOR ACK or
NAK command immediately after each EOF primitive.
AUTO_WAIT_SAS_AFTER_
OPEN_FOR_OPEN_ACCEPT FALSE When set, the generator will insert WAIT_FOR
OPEN_ACCEPT command immediately after each
Open Address Frame.
AUTO_WAIT_SAS_AFTER_
OPEN_FOR_OPEN_REJECT FALSE When set, the generator will insert WAIT_FOR
OPEN_REJECT command immediately after each
Open Address Frame.
AUTO_WAIT_SAS_AFTER_
IDENTIFY_FOR_IDENTIFY_
FRAME FALSE When set, the generator will insert WAIT_FOR
Identify Frame command immediately after each
Identify Address Frame.
AUTO_WAIT_SAS_AFTER_
SMP_REQ_FOR_RESP FALSE When set, the generator will insert WAIT_FOR SMP
Response Frame command immediately after each
SMP Request Frame.
AUTO_WAIT_SAS_BEFORE Settings
AUTO_WAIT_SAS_BEFORE_
CLOSE_FOR_CLOSE
FALSE When set, the generator will insert WAIT_FOR CLOSE
command right before each CLOSE primitive.
AUTO_WAIT_SAS_BEFORE_
SOF_FOR_CREDIT FALSE When set, the generator will insert WAIT_FOR
CREDIT command right before each SOF primitive.
AUTO_WAIT_SAS_BEFORE_
IDENTIFY_FOR_IDENTIFY_
FRAME FALSE When set, the generator will insert WAIT_FOR
Identify Frame command right before each Identify
Address Frame.
AUTO_WAIT_SAS_BEFORE_
OPEN_ACCEPT_FOR_OPEN FALSE When set, the generator will insert WAIT_FOR Open
Frame command right before each OPEN_ACCEPT
primitive.
AUTO_WAIT_SAS_BEFORE_
OPEN_REJECT_FOR_OPEN FALSE When set, the generator will insert WAIT_FOR Open
Frame command right before each OPEN_REJECT
primitive.
AUTO_WAIT_SAS_BEFORE_
AIP_FOR_OPEN FALSE When set, the generator will insert WAIT_FOR Open
Frame command right before each primitive of AIP
group.
AUTO_WAIT_SAS_BEFORE_
SMP_RESP_FOR_REQ FALSE When set, the generator will insert WAIT_FOR SMP
Request Frame command right before each SMP
Response Frame.
Setting
Default
Value
Description