Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual User Manual
Page 478
Advertising
Teledyne LeCroy
Resetting the Toolbar
476
Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Stop Generation
Resume Generation
Connect Link
Disconnect Link
Generation Options
From time to time (such as following a software upgrade), it is possible for the buttons on
the toolbar to not match their intended function. You can reset the toolbar by performing
the following steps:
1. Select View > Toolbars from the menu bar.
2. Select Customize from the submenu to display the Customize dialog box.
Figure 5.34: Customize Commands
3. Select the Toolbars tab to display the Toolbars page of the Customize dialog box.
Figure 5.35: Customize Toolbars
4. Click the Reset All button.
The toolbar resets to the factory defaults.
Advertising