Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual - Manual (Page 454)

Teledyne LeCroy Sierra Trainer Generation Commands
452 Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
SATA Link Init Settings
OOB_SATA_D102_Time
100000 D10.2 time for SATA link synchronization in
OOBIs.During the specified period, the generator will
transmit D10.2 symbols.
OOB_SATA_Align_Time 100000 ALIGN(0) time for SATA link synchronization in
OOBIs.During the specified period, the generator will
transmit ALIGN(0) primitives.
SAS Speed Negotiation Settings
OOB_SAS_Align1_Time
81920 ALIGN(1) time for SAS speed negotiation in
OOBIs.During the specified period, the generator will
transmit ALIGN(1) primitives.
OOB_SAS_Align0_Time 81920 ALIGN(0) time for SAS speed negotiation in
OOBIs.During the specified period, the generator will
transmit ALIGN(0) primitives.
OOB_SAS_Interspeed_Time 750000 Interspeed time for SAS speed negotiation in
OOBIs.During the specified period, the generator will
keep the line at electric idle.
OOB_SpeedNeg_MTT. 29998080
OOBI The maximum time in OOBI during which training
phase of speed negotiation should be completed in
Train‐SNW.
OOB_SpeedNeg_SNTT. 2200
OOBI The time in OOBI during which generator transmits
phy capability bits in SNW‐3. In Automatic
connection This value is also used for the time during
which generator sends Align0 and Align1 in SNW1
and SNW2.
OOB_SpeedNeg_BCT. 2200
OOBI The time in OOBI during which generator transmits
COMWAKE or D.C. idle during SNW‐3.
Setting
Default
Value
Description