Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual - Manual (Page 439)

Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual 437
Sierra Trainer Generation Commands Teledyne LeCroy
 OPEN_ACCEPT
 OPEN_REJECT (BAD DESTINATION)
 OPEN_REJECT (CONNECTION RATE NOT SUPPORTED)
 OPEN_REJECT (NO DESTINATION)
 OPEN_REJECT (PATHWAY BLOCKED)
 OPEN_REJECT (PROTOCOL NOT SUPPORTED)
 OPEN_REJECT (RESERVED ABANDON 0)
 OPEN_REJECT (RESERVED ABANDON 1)
 OPEN_REJECT (RESERVED ABANDON 2)
 OPEN_REJECT (RESERVED ABANDON 3)
 OPEN_REJECT (RESERVED CONTINUE 0)
 OPEN_REJECT (RESERVED CONTINUE 1)
 OPEN_REJECT (RESERVED INITIALIZE 0)
 OPEN_REJECT (RESERVED INITIALIZE 1)
 OPEN_REJECT (RESERVED STOP 0)
 OPEN_REJECT (RESERVED STOP 1)
 OPEN_REJECT (RETRY)
 OPEN_REJECT (STP RESOURCES BUSY)
 OPEN_REJECT (WRONG DESTINATION)
 DONE (ACK/NAK TIMEOUT)
 DONE (CREDIT TIMEOUT)
 DONE (NORMAL)
 DONE (RESERVED 0)
 DONE (RESERVED 1)
 DONE (RESERVED TIMEOUT 0)
 DONE (RESERVED TIMEOUT 1)
 SAS Specific Script‐Defined Constants
 SAS_AF_DT_NO_DEVICE_ATTACHED
 SAS_AF_DT_END_DEVICE
 SAS_AF_DT_EDGE_EXPANDER_DEVICE
 SAS_AF_DT_FANOUT_EXPANDER_DEVICE
 SAS_AF_FT_IDENTIFY
 SAS_AF_FT_OPEN
 SAS_AF_PROTOCOL_SMP
 SAS_AF_PROTOCOL_SSP
 SAS_AF_PROTOCOL_STP
 SAS_AF_PROTOCOL_UNKNOWN
 SAS_AF_RATE_1_5_GBPS
 SAS_AF_RATE_3_GBPS
 SAS_AF_RATE_6_GBPS
 SMP_FRAME_TYPE_REQUEST
 SMP_FRAME_TYPE_RESPONSE
 SMP_REPORT_GENERAL
 SMP_REPORT_MANUFACTURER_INFO
 SMP_DISCOVER
 SMP_REPORT_PHY_ERROR_LOG
 SMP_REPORT_PHY_SATA
 SMP_REPORT_ROUTE_INFO