Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual - Manual (Page 260)

Teledyne LeCroy Compliance Test (SATA)
258 Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
Figure 3.74: Compliance Test Dialog
The Phy Test and Digital Test groups are displayed in the left column. The Digital Tests
comprise of the following:
 General Device Requirements
 Native Command Queuing
 Asynchronous Signal Recovery
 Software Settings Preservation
 Interface Power Management
2. Choose the tests in the left pane of the dialog by clicking on the checkboxes and
click the Add>> button.
You can add all or remove all by clicking Add All or Remove All.
3. Select a Compliance Type: Device or Host