Teledyne LeCroy Sierra M6-2 SAS_SATA Protocol Analyzer User Manual - Manual (Page 306)

Teledyne LeCroy TxRx Vout & Preemphasis
304 Sierra M6‐2 SAS/SATA Protocol Analyzer User Manual
To select TX Vout, select Setup > TxRx Vout & Preemphasis to display the 
Rx/Tx Settings dialog.
Figure 3.129: Choose Port for TXRx Vout
Port displays ports to select from.
Copy Selected Port Settings to All Ports implements one port's setting into all other port
settings.
Input signal equalization allows you to select values for Short time constant, Medium
time constant, Long time constant, Output power level and Loss of signal from the drop‐
down menu.
Output pre‐emphasis:
Output Pre Long allows you to select values for Pre‐emphasis level, Pre‐emphasis decay,
from the drop‐down menu.
Output Pre Short allows you to select values for Pre‐emphasis level, Pre‐emphasis decay,
from the drop‐down menu.
Port Status displays number of errors per second.
Apply applies the selected settings.
Start Reading Port Status implements reading of number of errors displayed in Port
Status.
Restore Factory Settings restores default values.
Save saves the new values as a *.sng file.
Load loads back the saved *.sng file.