Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 1013)

Brocade 6910 Ethernet Access Switch Configuration Guide 957
53-1002651-02
43
Simple Network Management Protocol
Add OID Subtree
• View Name – Lists the SNMP views configured in the Add View page.
• OID Subtree – Adds an additional object identifier of a branch within the MIB tree to the
selected View. Wild cards can be used to mask a specific portion of the OID string.
• Type – Indicates if the object identifier of a branch within the MIB tree is included or excluded
from the SNMP view.
Interface
To configure an SNMP view of the switch’s MIB database:
1. Click Administration, SNMP.
2. Select Configure View from the Step list.
3. Select Add View from the Action list.
4. Enter a view name and specify the initial OID subtree in the switch’s MIB database to be
included or excluded in the view. Use the Add OID Subtree page to add additional object
identifier branches to the view.
5. Click Apply
FIGURE 256 Creating an SNMP View
To show the SNMP views of the switch’s MIB database:
1. Click Administration, SNMP.
2. Select Configure View from the Step list.
3. Select Show View from the Action list.
FIGURE 257 Showing SNMP Views