Figure 279 confi, Figure 280 s – Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) User Manual
Page 1035
Advertising
Brocade 6910 Ethernet Access Switch Configuration Guide
979
53-1002651-02
43
Remote Monitoring
6. Enter an index number, the sampling interval, the number of buckets to use, and the name of
the owner for this entry.
7. Click Apply
FIGURE 279
Configuring an RMON History Sample
To show configured RMON history samples:
1. Click Administration, RMON.
2. Select Configure Interface from the Step list.
3. Select Show from the Action list.
4. Select a port from the list.
5. Click History.
FIGURE 280
Showing Configured RMON History Samples
To show collected RMON history samples:
1. Click Administration, RMON.
2. Select Configure Interface from the Step list.
3. Select Show Details from the Action list.
4. Select a port from the list.
5. Click History.
Advertising