Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 1120)

1064 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
44
Setting the Switch’s IP Address (IP Version 6)
Interface
To show the IPv6 statistics:
1. Click IP, IPv6 Configuration.
2. Select Show Statistics from the Action list.
3. Click IPv6, ICMPv6 or UDP.
FIGURE 341 Showing IPv6 Statistics (IPv6)
UDP Statistics
Input The total number of UDP datagrams delivered to UDP users.
No Port Errors The total number of received UDP datagrams for which there was no application at
the destination port.
Other Errors The number of received UDP datagrams that could not be delivered for reasons
other than the lack of an application at the destination port.
Output The total number of UDP datagrams sent from this entity.
TABLE 183 Show IPv6 Statistics - display description (Continued)
Field Description