Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 834)

778 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
35
Configuring VLAN Translation
Parameters
These parameters are displayed:
• Old VLAN – The original VLAN ID. (Range: 1-4093)
• New VLAN – The new VLAN ID. (Range: 1-4093)
Interface
To configure VLAN translation:
1. Click VLAN, Translation.
2. Select Add from the Action list.
3. Select a port, and enter the original and new VLAN IDs.
4. Click Apply.
FIGURE 109 Configuring VLAN Translation
To show the mapping entries for VLANs translation:
1. Click VLAN, Translation.
2. Select Show from the Action list.
FIGURE 110 Showing the Entries for VLAN Translation