Figure 215 confi, Figure 216 s – Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) User Manual
Page 955
Brocade 6910 Ethernet Access Switch Configuration Guide
899
53-1002651-02
42
Access Control Lists
3. Use the Add Mirror page to specify the ACL and the destination port to which matching traffic
will be mirrored.
Parameters
These parameters are displayed:
•
Port – Port identifier.
•
ACL – ACL used for ingress packets.
Interface
To bind an ACL to a port:
1. Click Security, ACL.
2. Select Configure Interface from the Step list.
3. Select Add Mirror from the Action list.
4. Select a port.
5. Select the name of an ACL from the ACL list.
6. Click Apply.
FIGURE 215
Configuring ACL Mirroring
To show the ACLs to be mirrored:
1. Select Configure Interface from the Step list.
2. Select Show Mirror from the Action list.
3. Select a port.
FIGURE 216
Showing the VLANs to Mirror