Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 909)

Brocade 6910 Ethernet Access Switch Configuration Guide 853
53-1002651-02
42
AAA Authentication, Authorization and Accounting
To configure the RADIUS or TACACS+ server groups to use for accounting and authorization:
1. Click Security, AAA, Server.
2. Select Configure Group from the Step list.
3. Select Add from the Action list.
4. Select RADIUS or TACACS+ server type.
5. Enter the group name, followed by the index of the server to use for each priority level.
6. Click Apply.
FIGURE 171 Configuring AAA Server Groups
To show the RADIUS or TACACS+ server groups used for accounting and authorization:
1. Click Security, AAA, Server.
2. Select Configure Group from the Step list.
3. Select Show from the Action list.
FIGURE 172 Showing AAA Server Groups