Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 180)

124 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
6
SNMP Commands
Default Setting
Rising Threshold: 90%
Falling Threshold: 70%
Command Mode
Global Configuration
Command Usage
Once the rising alarm threshold is exceeded, utilization must drop beneath the falling threshold
before the alarm is terminated, and then exceed the rising threshold again before another alarm is
triggered.
Example
Console(config)#process cpu rising 80
Console(config)#process cpu falling 60
Console#
Related Commands
“show process cpu” on page 59