Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 719)

Brocade 6910 Ethernet Access Switch Configuration Guide 663
53-1002651-02
32
Navigating the Web Browser Interface
Auto Traffic Control Sets thresholds for broadcast and multicast storms which can be used to
trigger configured rate limits or to shut down a port 810
Configure Global Sets the time to apply the control response after traffic has exceeded the
upper threshold, and the time to release the control response after traffic
has fallen beneath the lower threshold 811
Configure Interface Sets the storm control mode (broadcast or multicast), the traffic
thresholds, the control response, to automatically release a response of
rate limiting, or to send related SNMP trap messages 812
Priority
Default Priority Sets the default priority for each port or trunk 815
Queue Sets queue mode for the switch; sets the service weight for each queue
that will use a weighted or hybrid mode 816
Trust Mode Selects DSCP or CoS priority processing 821
DSCP to DSCP 822
Configure Maps DSCP values in incoming packets to per-hop behavior and drop
precedence values for internal priority processing 822
Show Shows the DSCP to DSCP mapping list 822
CoS to DSCP 824
Configure Maps CoS/CFI values in incoming packets to per-hop behavior and drop
precedence values for priority processing 824
Show Shows the CoS to DSCP mapping list 824
PHB to Queue 819
Configure Maps internal per-hop behavior values to hardware queues 819
Show Shows the PHB to Queue mapping list 819
DiffServ 827
Configure Class 828
Add Creates a class map for a type of traffic 828
Show Shows configured class maps 828
Modify Modifies the name of a class map 828
Add Rule Configures the criteria used to classify ingress traffic 828
Show Rule Shows the traffic classification rules for a class map 828
Configure Policy 831
Add Creates a policy map to apply to multiple interfaces 831
Show Shows configured policy maps 831
Modify Modifies the name of a policy map 831
Add Rule Sets the boundary parameters used for monitoring inbound traffic, and
the action to take for conforming and non-conforming traffic 831
Show Rule Shows the rules used to enforce bandwidth policing for a policy map 831
Configure Interface Applies a policy map to an ingress port 839
TABLE 153 Switch Main Menu (Continued)
Menu Description Page